How to Replace Brake Pads on a 2017 Ford F-150
This guide will help you replace the brake pads on a 2017 Ford F-150.
Tools Needed
- Jack and jack stands
- Tire iron
- Socket wrench set
- Large C-clamp or brake caliper press
- New brake pads
Steps to Replace Brake Pads
Step 1: Secure Your Vehicle
Park your vehicle on a flat surface and use parking brake. Use the jack to lift the front of your vehicle. Securely place jack stands under the vehicle to ensure safety.
Step 2: Remove the Wheel
Use the tire iron to remove the lug nuts on the wheel. Once the lug nuts are off, pull the wheel off of the hub.
Step 3: Remove the Caliper
Use your socket wrench to remove the caliper bolts. Lift the caliper off the rotor and suspend it somewhere safe without putting any stress on the brake line.
Step 4: Replace the Brake Pads
Slide the old brake pads out of the caliper, then press the piston inside the caliper back into its cylinder with the C-clamp or brake caliper press. Once the piston is back in place, slide the new brake pads into position.
Step 5: Reinstall the Caliper and Wheel
Reposition the caliper over the rotor and reinstall the caliper bolts. Put the wheel back on the hub and tighten the lug nuts with the tire iron. Lower the vehicle.
Step 6: Test the Vehicle
Start your vehicle and press the brake pedal several times. If it feels firm, then you've successfully changed your brake pads. If the brake pedal feels soft, repeat the process again or seek professional help.
Wrap Up
Repeating these steps for all four wheels will ensure that your braking system is working properly. Drive safe!
```